Tolerance Capabilities
- 0.008 inches Total Range
- 0.004 inches Total Range
- ±1 degree
No expanding: ±0.005 inches
Expanding up to 10” in diameter: ±0.002 inches
Expanding between 10 – 18” in diameter: ±0.004 inches
Out of round (free state form):
2.5″ to 4″: 0.020 Total Range
4″ to 6″: 0.030 Total Range
6″ to 10″: 0.045 Total Range
10″ to 13″: 0.060 Total Range
13″ to 16″: 0.093 Total Range
16″ to 19″: 0.125 Total Range
Out of round:
- 1″ to 2.5″: 0.020 Total Range
- 2.5″ to 4″: 0.035 Total Range
- 4″ to 6″: 0.045 Total Range
- 6″ to 10″: 0.062 Total Range
- 10″ to 13″: 0.093 Total Range
- 13″ to 16″: 0.125 Total Range
- 16″ to 19″: 0.187 Total Range
- Bumped up to 4.5” diameter: 0.010 Total Range
- Unbumped up to 19” diameter: 0.060 Total Range
- Bumped up to 6.5” diameter: ±0.005 inches
- Unbumped 1.5” to 6” diameter: ±0.025 inches
- Large ring – 6″ to 19” diameter: ±0.032 inches
- Internal punch & button: ±0.015 inches
- Within a die set: ±0.005 inches
- From CNC axial datum edge: ±0.005 inches
- 1″ to 6” diameter: 0.015 Total Range
- 6″ to 18” diameter: 0.030 Total Range
- ±0.02 inches
- ±1 degree
- ±0.125 inches
Length cutoff: ±.004 inches
Parallelism: .005 Total
Perpendicularity: .005 Total
Internal and external diameter turning: ±0.005 inches
Depth of rabbets: ±0.015 inches
* Please note that these tolerance capabilities are average tolerances. Actual results may vary slightly by design/material requirements.